4tnv92 4tne92 4d92 Gasket Kit for Yanmar Engine Parts 129901-01350

4tnv92 4tne92 4d92 Gasket Kit for Yanmar Engine Parts 129901-01350

Engine introduction

The 4TNV92 engine is a diesel engine designed and produced by Japanese diesel engine manufacturer Yanmar Company. The following is some basic introduction to the 4TNV92 engine:
1. Structure and displacement: The 4TNV92 engine adopts an in-line four-cylinder, four-stroke structure. The usual displacement is 1.8 liters (1796cc).
2. Fuel system: This engine uses a direct injection fuel system, which injects diesel directly into the cylinder through the injector. Direct injection technology improves combustion efficiency and power output while reducing fuel consumption and emissions.
3. Power and Torque: Specific power and torque outputs vary by vehicle model and trim. Generally speaking, the power of the 4TNV92 engine ranges from 22 to 45 kW and the torque ranges from 90 to 180 N·m.
4. Technical features: The 4TNV92 engine uses turbocharging and intercooler technology to provide higher power output and fuel economy. The turbocharger increases intake airflow pressure, improving low-speed torque and power response. The intercooler cools the intake air, increases the oxygen density of the intake air, and further improves combustion efficiency.
5. Application scope: 4TNV92 engine is mainly used in small construction machinery, agricultural equipment, ships and other fields. With its compact, lightweight and efficient features, it performs well in small work spaces and scenarios with low power requirements.

Installation introduction

Installing the 4TNV92 engine requires certain mechanical knowledge and expertise. The following are general installation steps, but please note that specific installation procedures may vary based on vehicle type, configuration and application. It is recommended that you refer to the relevant vehicle manual or consult a professional technician before installation to ensure correct installation and operation.
1. Preparation: Make sure the installation area is clean and remove the old engine (if applicable). Check the new 4TNV92 engine and corresponding installation accessories to ensure that all parts and accessories are complete.
2. Install the engine base: Install the engine base or bracket according to the structure of the vehicle. Make sure the base is strong and stable and can bear the weight of the engine.
3. Connect the transmission system: Connect the components of the transmission system (such as clutch, transmission, etc.) to the crankshaft of the engine. Make sure connections are made correctly, using appropriate connectors and tightening torques.
4. Install the cooling system: Connect the pipes and radiators of the cooling system to ensure that the coolant in the cooling system can circulate and dissipate heat properly.
5. Install the exhaust system: Connect the exhaust pipe and muffler to ensure that the exhaust gas in the exhaust system can be discharged correctly.
6. Connect the fuel system: Connect the fuel supply pipe and filter to ensure that fuel can be supplied to the engine smoothly.
7. Connect the electrical system: Connect the engine's electrical system, including battery, starter, generator, etc. Make sure the electrical connections are correct and the circuit is reliable.
8. Ensure adjustment and alignment: After completing installation, check that all connections and components are tight. Ensure smooth operation of the transmission system and check cooling, exhaust and fuel systems for tightness and proper operation.
9. Testing and debugging: Before starting the engine, perform necessary testing and debugging, including checking oil pressure, coolant temperature, fuel supply, etc. Make sure the engine runs smoothly, has no abnormal sounds and works normally.

Company Profile